Search by OEM No
Search by Description
  • Language: 中文
  • Español

TECHOPART

  • Home
  • News
  • About Us
    • Introduction
    • Markets
    • Relative parts
  • Products
    • Categories
    • Catalogues
    • Equipment
    • Test Report
  • Contact Us

Test Report

 

Lubricant Activator: Enhanced engine oil lubrication, used in all kinds of engine.

 SGS TEST REPORT

To  save money, Carbon reduction , Environmental protection

 

Product Performance
Reducing fuel consumption
Reducing tar generation, cleaning carbon deposit
Reducing exhaust discharge
 
Safety of Product
The composition have Nano Gold , special titanium catalyst and ethylene glycol , No base oil , no poison. After SGS company inspection, products comply with REACHs

Vehicle Applications
Application scope: Suitable for all type vehicles and liquid and gas fuel combustion engines.
 
Application instructions:
 
1、 Oil Oxygen Activation Device
       After nebulizing the liquid oil oxygen activator, the mist is lead into the cylinder and mixes with the fuel oil for combustion.

2、 Oil Oxygen Activator
       The activator crakes into activated oxygen and assists the oxygen-rich combustion.

3、 Engine oil activator
       The activator enhances lubrication of engine oil, restrains oil acidification, and extends oil lifespan.
 
The combination of the above items enables economical and environmental benefits of more than 15% energy saving and more than 20% reduction of air pollutants.
 
Engine oil activator
 
Application instructions:
Added into oil pan by a portion of 100:1.

Engine oil:
Activates the base oil and additives for a thorough mixture, increasing strength and toughness of the oil film, lowering friction loss of machine parts therefore resulting in increased power output
 
Cleaning:
Removes internal oil sludge from the engine, cleans lubrication channels therefore increasing lubrication and lowering engine noise.
 
Energy saving:
The enhanced strength of oil film helps to better sealing the piston ring and to optimize the lubrication, therefore resulting in increased horsepower and torque.
 
Performances:
Enhanced lubrication of machine oil
Extended lifespan of engine oil
Reduced friction and elevated horsepower

  

MATERIAL SAFETY DATA SHEET
Engine Oil Activator
 
1、Product and Company Identification :
Product Name:                  NANO - GOLD ENGINE OIL  ACTIVATOR
Product No. :                                         TYPE MF 3
Company Name:                    Tecnopart International Co., Ltd.

Address:  4F, NO 16 LANE 181 SEC 2, JIUZONG ROAD, TAIPEI, TAIWAN, R.O.C.

Tel No./Fax No.:  886-2-27990822 / 886-2-27978753
 

2、Composition/Information on Ingredients :

Chemical Characteristic: Compound

Chemical Name

Percentage of
 ingredients (%)

Hazardous substance classification and icons

1. Colloidal titanium composite

7.5

NO ( NFPA FIRE = 1 )

2, Colloidal gold

300ppm

NO ( NFPA FIRE = 1 )

3, Biological extracts

12.5

NO ( NFPA FIRE = 1 )

4, Surfactant

5

NO ( NFPA FIRE = 1 )

5,Ethylene glycol

<75

NO ( NFPA FIRE = 1 )

 

3、Hazards Identification :                
      Light:                                  Red Liquid
      Potential :                           Health Effects
      Inhalation :                         Supply fresh air
      Skin Contact :                    Wash with water . 
      Eyes Contact :                   Rinse opened eye for several minutes under running water..
      Ingestion :                          Rinse out mouth and then drink plenty of water.

 

4、First Aid Measures :
      Inhalation:       Person should be move to a fresh air environment.
      Skin Contact:  Wash affected skin with soap and water.  Seek medical attention if 
                              symptoms persist.
      Eyes Contact: Flush eyes with large amounts of water for at least 20 minutes.  If irritation 
                              persists, consult a physician.
      Ingestion :       Do not induce vomiting.  If conscious and alert, rinse mouth and drink 2-4 
                              cupfuls of milk or water.

 

5、Fire Fighting Measures :
      Suitable extinguishing agents:  CO2, extinguishing powder or water spray.
      Fight Larger Fires with water spray or alcohol-resistant foam.
      Use fire fighting measures that suit the environment.
      For safety reasons unsuitable extinguishing agents : Water-jet.

 

6、Accidental Release Measures :
      Dike and contain the spill with inert material (i.e., sand, earth, sawdust) and transfer liquid and solid diking material to separate containers for recovery or disposal.  Wash floor area with hot water solution.   Remove contaminated clothing and wash before reuse.  
      Wash affected skin area with soap and water.  Keep spill out of all sewers and bodies of water.

 

7、Handling and Storage :
      Information for safe handling: prevent formation of dust
      Information about protection against explosions and fires: keep breathing equipment ready
      Store under dry and well ventilated conditions in sealed containments.

 

8、Exposure Controls/Personal Protection :
      Components with critical values that require monitoring at the workplace.
      The product does not contain any relevant quantities of materials with critical values that 
      have to be Monitored at the workplace.
      Additional information : The lists that were valid during the compilation were used as basis.
      Personal protective equipment :  General protective and hygienic measures.     
      Eye Protection:  Goggles


9、Physical and Chemical Properties :

Form: Liquid

Odor :  None

Color : Red

Boiling Point:195℃-

pH:7

Flash Point  : 110℃-
Test Methods: Closed  Cup

Ignition Temp:   398℃

Decomposition Temp:300℃

Density: 1.105 g/cm2

Vapor the pressure: Not applicable

 

10、Stability and Reactivity :
        Stability : This product is stable under normal conditions.
        Conditions to Avoid : Strong oxidizing agents.
        Hazardous Polymerization : Will not occur normal circumstances.


11、Toxicological Information :

Acute oxicity:                                              

None

Inhalation:  
On the skin:   
On the eye

None
No irritant
No irritant

Sensitization:                                                 

None

Chronic or Long-Term toxicity: 

None

 

12、Ecological Information :
        Summary: Data for this material have been used to estimate its environmental impact. 
        It has the following properties :a high potential to affect some aquatic organisms,
        Some potential to biodegrade with acclimated microorganisms from activated sludge,
        a low potential to persist in the environment, and a low potential to bioconcentrate.
        General notes: Do not allow product to reach ground water, water bodies or sewage system.


13、Disposal Considerations ;
        Product recommendation : Disposal must be made in according to official legislations.
        Uncleaned packaging recommendation: Disposal must be made in according to official regulations.


14、Transport Information :
        Not classified as hazardous according to the Department of Transportation.


15、Regulatory Information :
        Designation according to EC guidelines: The product is not subject to identification regulations under ED directives and the Ordinance on Hazardous Materials. Observe the normal safety regulations when handling chemicals.
        National regulations:  The product is not dangerous in accordance with EC-Directives and no label is required.

MATERIAL SAFETY DATA SHEET
Engine Oil Activator

SGS TEST REPORT

 

 


Tecnopart International Co., Ltd.

ADD:4F, NO.16, LANE 181, SEC.2, JIUZONG ROAD, TAIPEI, TAIWAN, R.O.C.

TEL:+886-2-2799-0822 FAX:+886-2-2797-7158 EMAIL: tecno.part@msa.hinet.net

Copyright (C) Tecnopart International Co., Ltd. All Rights Reserved.